CS Instrument Thermal Mass Flow Meter
In-Line Air Flowmeter Model VA 525
The newly developed VA 525 combines modern digital interfaces for connection to an energy monitoring system with a small, compact design. Due to its reasonable price and modern digital interfaces this compact in-line flow sensor is used when many machines (compressed air consumers) are to be integrated as easily as possible into an energy monitoring network.Feature
- Compact, small design – for use in machines, behind maintenance unit at the end-user
- Optionally with classic analog signals(4…20 mA and pulse) or digital interfaces such as Modbus RTU, Ethernet (also PoE), M-Bus
- All interfaces are programmable via the display
- Current consumption in m³/h, l/min,…
- Total consumption (meter reading) in m³, l, kg
- Temperature measurement
- Optional: pressure measurement
- Easy installation in existing piping through integrated measuring block (suitable for 1/4 ̋, 1/2“, 3/4 ̋, 1“, 1 ¼ ̋, 1 ½“ or 2″ lines)
- Display values can be rotated 180° in the display, e. g. when installing overhead
Specification
| Parameters | m³/h, l/min (1000 mbar, 20 °C) in case of compressed air resp. Nm³/h, Nl/min (1013 mbar, 0°C) in case of gases |
| Units adjustable via keys at a display | m³/h, m³/min, l/min, l/s, ft/min, cfm, m/s, kg/h, kg/min, g/s, lb/min, lb/h |
| Sensor | Thermal mass flow sensor |
| Meas medium | Air, gases |
| Gas types over CS Service Software or CS Datalogger adjustable | Air, nitrogen, argon, CO2, oxygen |
| Accuracy (f. M. = from the measured value) (f. E. = from end value) |
± 1,5 % of m. v. ± 0,3 % of f. s.
By request:
± 1 % of m. v. ± 0,3 % of f. s. or
± 6 % of m. v. ± 0,5 % of f. s.
|
| Pressure measurement | 0…16 bar, accuracy: 1% |
| Operating temp. | -30…80 °C |
| Operating pressure | Up to 16 bar |
| Digital output | RS 485 interface (Modbus RTU), M-Bus (optional) Ethernet interface or PoE |
| Analog output | 4…20 mA for m³/h resp. l/min |
| Pulse output | 1 pulse per m³ or per liter galvanically isolated. Pulse value adjustable on the display. Alternatively, the pulse output can be used as an alarm relay. |
| Power supply | 18…36 VDC, 5 W |
| Burden | < 500 Ω |
| Housing | Polycarbonate (IP 65) |
| Meas. section | Aluminum |
|
Mounting thread meas. section:
|
G 1/4“ to G 2“ (BSP British Standart piping) resp. 1/2“ to 2“ NPT-thread
|
| Mounting position: | Any |
More info and price please contact marketing@wmablog.com
