Ultrasonic Flow Meter | Water Flow Meter
In-Line Ultrasonic Flow Meter
High
Dynamic Response Inline Ultrasonic Flowmeter The model SL3488 inline
ultrasonic flowmeter ( here in after referred to as SL3488) is a true
state-of-the-art transit-time flowmeter designed using PICOFLY
technology and 0.01nanosecond (10 picoseconds) resolution; the
flow sample rate achieved is 256 discrete flow measurements per
second, which provides a true high dynamic response flowmeter. This
makes this meter for rapid on/off or pulsating flow applications.
Features
- Super Low Flow Rate Measuring
- The high dynamic response, real-time flow change trac
- High reliability
- Long-term stability
- Menu-driven operation (no instructions needed)
- High accuracy: 0.5 % of measurement
- Highly stable zero
- PC enclosure (water and corrosion-proof)
SL3488
is designed using the latest digital technology. This meter features
high reliability, low maintenance, and no moving parts. Unique digital
signal processing and correlation programming from the MPU provides
instantaneous meter measurement (no damping needed).
SL3488
has been tested under rigorous field working conditions and has shown
steadfast performance, which offers the customer confident worry-free
measurement. Compared with other flowmeters and other ultrasonic
flowmeters, the SL3488 is characterized by high accuracy, high
credibility, superior performance, very rapid response to flow changes,
and low cost.
Applications by Industry
- Petrochemical
- Refining
- Steel
- Metallurgy
- Paper
- Coal
- Water supply
- Seawater
- Industrial process water
- Irrigation
- Cooling water
- Oil
- Beverage
- Chemical
SL3488 High Dynamic Response Ultrasonic Flowmeter
- Flow range : 0~7m/s
- Accuracy : 0.5% of reading
- Repeatability : 0.15%
- Output: OCT pulse output, relay out
- Communication: RS232
- Power supply: 90~245VAC@50/60Hz 12~12VAC@50/60Hz 12~36VDC
- Spool piece dimensions: DN8~DN250
Measurement Site Selection
- SL3488 inline ultrasonic flowmeter is easy and convenient to install. When the measured pipe size is consistent with the spool piece size, you can select a proper measurement site and install the meter which is ready to use.
- When selecting a measurement site, it is important to select an area where the fluid flow profile is fully developed to guarantee a highly accurate measurement. Use the following guidelines to select a proper measurement installation site:
- Choose a section of pipe, which is always full of liquid, such as a vertical pipe with the flow in the upward direction or a full horizontal pipe.
- Generally, it requires at least 10 D (pipe diameters) upstream & 5D (pipe diameters) downstream. If there is a pump, a tee section, a control valve, orifice, expansion joint or another element that could cause flow disturbances, the upstream straight pipe required will be greater than 10D.
- Ensure that the pipe surface temperature at the measuring point is within the transducer temperature limits.
More info and price please contact marketing@wmablog.com
