See-Flo 3200 Erdco Meters indicate flow rate

 

Erdco See-Flo 3200 Meters indicate flow rate and permit visual inspection of water, air or other transparent fluids. For general purpose industrial service, See-Flo^® meters handle a wide range of process fluids in vertical or horizontal piping runs. The wedge shape of the meter housing makes See-Flo^® practically self-cleaning. Where periodic maintenance might be necessary, the tempered glass window is easily removed and replaced.

Features

• Instantaneous flow rate measurement.
• Observe fluid conditions for color, clarity, and flow.
• Use in horizontal or vertical piping systems.
• Individually calibrated for fluid and operating conditions.
• User-selectable 10:1 turndown flow ranges. (See Meter Rangeability Sizing Tables)
• User-selectable units of measure including dual units of measure.
• No floats to get stuck, tubes to break or dynamic seals to leak.
• Low-pressure loss.
• Simple design with few parts for long service life.

Principle of operation

Erdco Armor-Flo^TM meters are variable area flow rate meters (“rotameter”). See-Flo® meters are variable area flow rate meters (“rotameter”). The internal volume of the housing enlarges from the inlet to the outlet.
The primary element is a tempered alloy vane with one end affixed to the apex of the meter housing. As the flow rate changes, the vane is flexed in direct proportion.

The ¹/₂“, ³/₄“, and 1” connections typically have female threaded ends. Sizes 1 ¹/₄” through 12″ utilize an integral by-pass housing enables larger connection sizes in the format of a spool with a consistent 12″ end to end dimension. In addition, it permits a wide variety of connection types which include threaded, flanged, grooved ends and tri-clamp.

Specifications

Accuracy: ±2% full scaleRepeatability: ±1% full scale
Scales:
Direct reading
Resolution: Maximum-30 division/Minimum-15 divisions
Rangeability: 10 to 1 turndown
Materials of Construction:

• Housing: Aluminum, brass, 70/30 copper/nickel, 316 stainless steel
• Shunt: As housing or carbon steel
• Window: Tempered glass or polycarbonate
• Vane: Cobalt/chromium/nickel alloy with Teflon ® encapsulated magnet
• “O” rings: buna-n, ethylene propylene, Viton® or perfluoroelastomer

Piping Connections:

• 1⁄2″ to 1″ NPT Female
• 1 1⁄4″ to 4″ NPT male
• 1 1⁄2″ to 3″ Tri-clamp
• 1 1⁄4″ to 6″ Grooved
• 1 1⁄4″ to 6″ Beveled 1⁄2″ to 8″ 150# /300# RF/FF ANSI Flanges (carbon stl)
• 1⁄2″ to 8″ 150# RF ANSI Flanges (stainless stl)
• 1⁄2″ to 6″ 150# RF ANSI Flanges (aluminum)
• 1⁄2″ to 6″ 150# FF ANSI Flanges (brass)
• 15 to 25 mm DIN 2999/BS21/ISO R7 Female threaded
• 15 to 150 mm DIN PN 10 Flanges (316 stainless stl & carbon stl)

Pressure Limits: 200 psig (13.8 bar)

• Temperature Limits:
  -23 to 85°C (-10 to 185°F) with a polycarbonate window.
  -23 to 121°C (-10 to 250°F) with buna-n o-ring.
  -23 to 121°C (-10 to 250°F) with Viton®, ethylene-propylene or perfluoroelastomer o-ring

ERDCO reserves the right to alter the design and/or specifications without notice. Viton^® is a registered trademark of E.I. duPont de Nemours and Co.

More information please click Erdco

More info and price please contact marketing@wmablog.com